Home > Plastic Bag Making Machine > Rotogravure Printing Press

Rotogravure Printing Press

Inquiry Form

Main Parameters of KYJZ Series Rotogravure Printing Press
1. Machine flow: From left to right
2. Printing colors: 9 colors
3. Maximum printing width: 850mm
4. Machine maximum speed: 220m/min
5. Maximum printing speed: 200m/min
6. Plate diameter: φ120-φ300
7. Plate width: 460mm -950mm
8. Overprint precision:
Vertically automatic registration precision: ± 0.1mm (complete machine)
Horizontally automatic registration precision: ± 0.1mm (complete machine)
Pre-register accuracy: ± 8mm
9. Wall thickness: 75mm
10. Material maximum roll diameter: φ600mm
11. Rewind and unwind by: built-in duplex bi-directional rotation axis
12. Ink supply: Circular supply
13. Ink transfer: Direct ink-transfer
14. Squeegee horizontally to automatically move: ± 5mm
15. Maximum imprint pressure: 500kg/full width
16. Material-fed tension control: Seven-motor and four-swing roller closed-loop control
17. Tension control range: 3-30kg ± 0.2kg/full width
18. Material-cut and joint: Non-stop automatically cut and joint
19. Paper core of roll material and assembling mode: ID φ76mm, OD φ92mm, inflatable shaft swelling
20. Drying type: Closed unilateral dryer (drying method: electric heating)
21. Minimum air pressure: 0.6Mpa
22. Main motor power: 22KW
23. Total electric power: 308kw
24. Machine dimensions: 20800mm×5200mm×3500mm (L × W × H)
25. Weight: About 40 tons
26. Power supply: 380V, ± 15%, 50HZ ± 2%, 3 Line

Printing Material
1. Polypropylene film OPP/BOPP/CPP: 15-60 micron
2. Polyester film PET: 12-60 micron
3. Nylon membrane PA: 15-60 micron
4. Cellophane: 20-30 micron
5. PVC film/PO/PVDC: 40-70 micron
6. Polyethylene membrane PE: 40-100 microns
7. Paper: 30-80 g/m

Related Producs
Feedback